Product Details

The Delem DM101 is a single-axis closed‑loop motion controller belonging to the Delem Modusys modular system for DAonWindows press brake controllers. This single-axis Modusys motion controller runs over the HSB bus and can be programmed and configured from the Delem front HMI. As a reliable press brake axis drive module, it supports servo, frequency inverter and two‑speed AC drive, accepts high‑frequency incremental encoder feedback and delivers analog drive output for precise positioning. This Delem HSB bus module is widely stocked as original spare hardware for retrofit and maintenance, commonly used to control backgauge, crowning or auxiliary axes on hydraulic press brakes. Up to 16 such modules can be linked on one bus for flexible multi‑axis expansion.

Basic Parameters

Brand: Delem

Model: DM101

Type: Single-axis Modusys motion control module

Bus: Delem HSB Modusys bus

Supply voltage: 24 VDC

Encoder: High‑frequency incremental encoder input

Drive output: Analog command output

Analog inputs: Onboard analog signal channels

Digital I/O: Opto‑isolated status and interlock terminals

Mounting: Plug‑in on Modusys dedicated backplane

Compatible system: Delem DA‑63P, DA‑65P, DA‑66W and other DAonWindows controllers

Product type: Original Delem single-axis motion spare module

Supported Functions

This single-axis Modusys motion controller executes closed‑loop position regulation for one independent machine axis. The press brake axis drive module supports servo positioning, inverter positioning and two‑speed AC positioning modes selected by machine parameters. It reads encoder position, calculates deviation and outputs analog commands to drive units. This Delem HSB bus module transmits real‑time axis position and diagnostic information to the main HMI, supports travel limit monitoring, interlock protection and rich fault diagnosis for fast troubleshooting.

Core Functions

Closed‑loop algorithm continuously compares target position and encoder feedback to reduce positioning error. The single-axis Modusys motion controller communicates synchronously over HSB bus with the operator panel and other Modusys modules. Onboard diagnostics detect encoder failure, bus dropout and drive anomalies and trigger protective lockout. Its standard pin assignment and Modusys interface enable direct plug‑and‑play replacement without large‑scale rewiring. Multiple DM101 units can be networked together to build scalable multi‑axis bending machine control systems.

Hardware Specifications & Environmental Features

Mounting: Plug‑in installation on Delem Modusys backplane

Operating temperature: 0 °C to +55 °C

Storage temperature: -20 °C to +70 °C

Relative humidity: 5% – 90%, non‑condensing

PCB treatment: Conformal coating for dust and moisture resistance

Condition: Original new or fully tested refurbished Delem spare part

Industry Applications: Applied in legacy petrochemical distributed control, old paper making production automation, material handling conveyor lines, packaging and textile machinery, water treatment remote signal collection and large conveyor remote I/O control racks.

Note: Confirm 800 series backplane compatibility, pulse signal type, counting mode and preset logic before ordering.

This is from our current stock.

available stock.xlsx