Product Details

Delem DM01-K-V1.4 is a dedicated control module and bending axis unit with firmware version V1.4, designed to cooperate with Delem press brake CNC systems for sheet metal bending equipment. This servo interface undertakes real-time axis closed-loop regulation, receiving command signals from the main controller and outputting drive instructions to servo or hydraulic actuators. The control module integrates signal terminal blocks, encoder feedback channels and logic circuits to monitor axis position, speed and torque continuously. As a fixed V1.4 firmware variant, this bending axis unit guarantees consistent timing and signal protocol matching for older Delem systems. It is an obsolete, hard-to-source discontinued spare, used as a direct replacement to restore axis motion control for ageing hydraulic press brakes.

Basic Parameters

Brand: Delem

Model: DM01-K-V1.4

Product Type: Axis control module, servo interface unit

Firmware Version: V1.4

Power Supply: 24 V DC

Interfaces: Encoder feedback port, servo drive terminal, serial communication port, status LED

Mounting: DIN rail or cabinet rack mounting

Net Weight: Approximately 0.95 kg

Condition: Original discontinued industrial spare

Supported Functions

This control module supports synchronized axis motion for press brake bending tasks. The bending axis unit receives target position and pressure commands from the Delem main CNC, runs closed-loop adjustment and sends driving signals to proportional valves or servo drives. The servo interface captures encoder feedback to correct positioning errors and triggers fault alarms for signal loss, overtravel or overload. It communicates steadily with the host controller to synchronize Y axes and backgauge movement. If this control module fails, the press brake will lose closed-loop axis control and cannot complete automatic bending cycles.

Core Functions

The core function of this control module is to serve as the local motion regulation core for legacy Delem press brakes. The bending axis unit converts digital bending commands into real-time drive signals and maintains positioning accuracy by continuous feedback sampling. The V1.4 firmware version ensures compatibility with early Delem controller protocols, avoiding communication mismatch after replacement. This servo interface is a vital spare part to recover synchronized bending axis performance for old sheet metal machinery.

Hardware Specifications & Environmental Features

Operating Temperature: 0°C ~ +50°C

Storage Temperature: -20°C ~ +70°C

Relative Humidity: 5%–90%, non-condensing

Housing: Compact industrial plastic casing

Protection: Reverse polarity protection, short-circuit protection for signal channels, IP20

Anti-interference: Isolated signal lines and EMI filtering to suppress cabinet electromagnetic noise

Compatibility: Matched with legacy Delem press brake CNC systems

Industry Applications: Applied in legacy petrochemical distributed control, old paper making production automation, material handling conveyor lines, packaging and textile machinery, water treatment remote signal collection and large conveyor remote I/O control racks.

Note: Confirm 800 series backplane compatibility, pulse signal type, counting mode and preset logic before ordering.

This is from our current stock.

available stock.xlsx