Product Details

Modicon 170BAM09600 is a compact mixed analog I/O module and reliable process signal module belonging to the Modicon Momentum InterBus‑S TIO remote I/O family. This momentum analog card acts as the interface between field analog instruments and the Momentum distributed control system, collecting continuous measurement signals and issuing analog control commands for closed‑loop regulation. It offers four analog input channels and two analog output channels, supporting widely adopted industrial signal ranges including 4‑20 mA and 0‑10 V DC, which fit perfectly with pressure transmitters, flow meters, temperature sensors, valve positioners and variable‑speed drive setpoint inputs. Built with on‑board LED diagnostic indicators and removable terminal connectors, the module enables straightforward wiring, quick status checking and convenient on‑site replacement. As a discontinued legacy spare, this mixed analog i/o module serves as a drop‑in replacement to restore analog signal acquisition and output capability for ageing Modicon Momentum distributed I/O racks.

Basic Parameters

Brand: Modicon (Schneider legacy)

Model: 170BAM09600

Product Type: Momentum InterBus‑S Mixed Analog I/O Module

Compatible System: Modicon Momentum distributed remote I/O system, InterBus‑S bus

Analog Input: 4 channels, 4‑20 mA / 0‑10 V DC

Analog Output: 2 channels, 4‑20 mA / 0‑10 V DC

Operating Temperature: 0°C to 40°C

Non‑condensing Humidity: up to 80% RH

Max Altitude: 1000 m without performance derating

Connection: Removable terminal block

Indicator: Front LED for power, bus and channel fault

Product Status: Discontinued legacy spare

Net Weight: Approximately 0.23 kg

Supported Functions

This mixed analog i/o module performs high‑precision analog‑to‑digital conversion for incoming field sensor signals and digital‑to‑analog conversion for outgoing control setpoints. The process signal module supports signal scaling, engineering unit conversion and over‑range / under‑range detection to identify broken transmitters and abnormal process values. This momentum analog card exchanges process data with the host controller over the InterBus‑S fieldbus, transmits real‑time measurement registers and accepts output commands from the PLC. It runs built‑in self‑diagnosis for bus communication failures, channel short circuits and wiring faults, greatly speeding up troubleshooting during plant maintenance.

Core Functions

As a dedicated momentum analog card, this mixed analog i/o module converts physical process signals into digital data readable by the controller and converts digital control commands back into standard analog signals for final control elements. It isolates field analog wiring from the backplane bus and suppresses common‑mode interference to preserve signal accuracy. This process signal module works as a direct spare to rebuild reliable analog closed‑loop control for ageing Modicon Momentum automation racks.

Hardware Specifications & Environmental Features

Operating Temperature: 0°C ~ +40°C

Storage Temperature: -20°C ~ +70°C

Relative Humidity: 5%–80%, non-condensing

Housing: Compact plastic Momentum module housing, IP20

Protection: Channel overvoltage and overcurrent suppression

Anti-interference: Differential signal sampling for improved noise rejection

Compatibility: Matches Modicon Momentum InterBus‑S TIO backplane and compatible bus adapters

Industry Applications: Applied in legacy petrochemical distributed control, old paper making production automation, material handling conveyor lines, packaging and textile machinery, water treatment remote signal collection and large conveyor remote I/O control racks.

Note: Confirm InterBus‑S bus address, signal wiring type and channel range configuration before ordering.

This is from our current stock.

available stock.xlsx